GRAPHTEC GL900 User Manual page 74

Settings and Measurement
(9) Data Replay Menu
When you press the MENU key during replay, the Data Replay Menu is displayed.
Cursor Position
Cursor Sync
Data Search
Statistical Calculation Statistical Calculation
between Cursors
X-Y Display Settings
Execute X-Y for All Data
Execute X-Y between Cursors
[xxx] shows a case in which xxx is selected from available selections.
(9)-1 Move to First Data
Moves the currently selected cursor (A or B) to the start of the data.
(9)-2 Move to Last Data
Moves the currently selected cursor (A or B) to the end of the data.
(9)-3 Move to Center
Moves the currently selected cursor (A or B) to the center of the data.
3-42
Setting
Move to First Data
Move to Last Data
Move to Center
Move to Trigger Position
Move to Method Position, Time
Selected [Position] Move to From 0 to Last Data
Position
[Time] Date
Time
Off, On
Level Combination
Settings Mode
Level
Alarm CH
Alarm CH mode
Next Search
Prev. Search
Execute
X-ch
Y-ch
Trace
Selections available
Execute
Execute
Execute
Execute
For example, the position is up to 9999 ms if the sampling
interval is 1 ms, the data capture destination is the internal
RAM, and the number of capture points is 10000.
From the date of First Data to the date of Last Data
From the time of First Data to the time of Last Data
Edge OR, Edge AND
Analog : Off, ↑ H, ↓ L, Win In, Win
Logic : Off, ↑ H, ↓ L
Pulse : Off, ↑ H, ↓ L, Win In, Win Out
Numeric value setting
Off, Output 1, Output 2, Output 3, Output 4
↑ Rising, ↓ Falling
Execute
Execute
Off, Average, Max, Min, Peak, RMS
Execute
CH1 to CH8
CH1 to CH8
Off, On
Execute
Execute