Table of Contents
Advertisement
Setting
X-ch
Y-ch
Trace
(9)-13 Execute X-Y for All Data
Converts all the replay data to X-Y display when executed.
(9)-14 Execute X-Y between Cursors
Converts only the data between Cursors A and B to X-Y display when executed.
(10) NAVI Menu
The NAVI menu can be displayed in three modes, Free Running, Recording, and Replay.
Operation
Open
Close
Browse explanation
(11) Quick Settings
Selections available
Sets a channel to be assigned to the X-axis in each zone.
Sets a channel to be assigned to the Y-axis in each zone.
Turns on or off the display in each zone.
On : Turns on the display of waveforms.
Off : Turns off the display of waveforms in this zone.
Description
Press the NAVI key to open the NAVI menu.
Press the NAVI key to close the NAVI menu.
Explanation is displayed when an enabled key is pressed.
Settings and Measurement
3-45
Advertisement
Table of Contents
