Table of Contents
Advertisement
Settings and Measurement
(9)-8 Next Search
Moves the cursor to a position after the current cursor position where the search conditions are met
(Set the search conditions in Section (9)-7, "Level Settings").
(9)-9 Prev. Search
Moves the cursor to a position before the current cursor position where the search conditions are
met (Set the search conditions in Section (9)-7, "Level Settings").
(9)-10 Calculation Function
Statistical calculation can be performed on the replay data between the cursors.
This menu is used to make settings for statistical calculation.
Selection
Off
Average
Max
Min
Peak
RMS
(9)-11 (Calculation) Execute
Performs calculation between cursors. Opens a window and displays calculation results when
Execute is selected.
(9)-12 X-Y Display Settings
The GL900 can convert waveform data to X-Y display. This menu is used to assign channels and
make other settings to convert the data to X-Y display.
3-44
Calculation is not performed.
Displays the simple average value of data being captured.
Displays the maximum value of data being captured.
Displays the minimum value of data being captured.
Displays the peak value of data being captured.
Displays the effective value of data being captured.
The calculation formula is as shown below.
2
R.M.S
ΣD
/n
* D : data
n : number of data
Description
Advertisement
Table of Contents
