Table of Contents
Advertisement
Settings and Measurement
Screen
Waveform
X-Y
(12) Canceling Key Lock with Password
A password can be set to GL800 to cancel the key lock.
(No password is set at factory default.)
<Operation method>
1. Set the password.
2. Set the key lock.
Hold down the
3. Cancel the key lock.
Hold down the
The password setting screen shown below will be displayed. Set a password.
Entering an incorrect password will not cancel key lock.
Key lock state will be retained when power is turned off.
3-46
Operation mode
Free Running
Recording
Capturing and Replaying
Replaying
Free Running
Press the , , and ENTER keys at the same time to display the
password setting screen shown below. Specify a 4 digit password.
Use the , , ,
confirm the password.
Specifying 0000 will disable password operation.
In case you forgot your password, please contact our call center to
acquire the master password.
and
keys together for at least two seconds.
and
keys together again for at least two seconds.
Content
SAMPLE
key can be used to change the sampling interval.
ZONE
key can be used to change the zone division.
ZONE
key can be used to change the zone division.
ZONE
key can be used to change the zone division.
SERCH
key can be used to perform search.
: Searches the past side.
: Searches the future side.
ZONE
key can be used to change the zone division.
SAMPLE
key can be used to change the sampling interval.
PENUP
key can be used to change the pen to Up or Down.
When Up is set, new waveforms are not drawn.
CLEAR
Press the
or
keys to select numbers. Press the ENTER key to
Explanation
key to clear the waveforms on the screen.
Advertisement
Table of Contents
