Table of Contents
Advertisement
Settings and Measurement
Switching displays
Analog and Logic/Pulse can be switched as shown below.
Analog settings
This screen allows you to set conditions for analog signals.
CHECKPOINT
ALL and Span All Settings are set only for the currently displayed group (per 10 channels).
(1)-1 Input
Selects input conditions.
Selection
Off
Voltage
Temperature
Humidity
(1)-2 Range
Specifies the range of signal input to be measured.
Input setting
Voltage
Temperature
Humidity
3-18
• Display Logic/Pulse Data
A screen switches
with ENTER key.
Disables the measurement of input signals and the waveform and digital display.
Used for measuring direct-current voltages.
Used for measuring temperatures.
Used for measuring humidity with humidity sensor B-530.
This selection sets the voltage range to 1V and disables EU settings.
20, 50, 100, 200, 500mV; 1, 2, 5, 10, 20, 50, 100, 200, 500V; 1-5V
TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W,
No selection
• Display Analog Data
Description
Selection
Advertisement
Table of Contents
