Table of Contents
Advertisement
11. DISPLAY
This key is used to switch the window mode.
You can switch the window mode during Free Running (when stopped) and
Capturing.
Pressing this key switches the window display as follows:
<Waveform + Digital Screen>
Displays waveforms and digital values.
This is the default screen when the GL900 is
powered on.
The screen settings can be changed by using
the SPAN/TRACE/POSITION key.
<Expanded Waveform Screen>
Displays only waveforms in a magnified view in
full screen mode.
<Digital + Calculation Display Screen>
Displays digital values and calculation results in
large text. The calculation settings can be
made using the DATA menu. See page 3-23.
<X-Y Display Screen>
Supports four-channel X-Y display. Any given
channels can be specified for X-axis and Y-axis.
The settings can be made using the SPAN/
TRACE/POSITION key, the pen can be moved
up, and the screen can be cleared. For details,
see 3-4.
Settings and Measurement
3-11
Advertisement
Table of Contents
