Abs (Anti-Lock Brake System) Warning Light - Triumph Explorer Owner's Handbook Manual

Table of Contents

Advertisement

ABS (Anti-Lock Brake System)
Warning Light
When the ignition switch is
turned to the ON position, it is
normal that the ABS warning
light will flash on and off. The
light will continue to flash after engine
start-up
until
the
motorcycle
reaches
a
speed
exceeding
(10 km/h) when it will go off.
The warning light should not illuminate
again until the engine is restarted
unless there is a fault, or:
ABS is disabled by the rider - the
warning light will remain illuminated
(see Bike Setup on page
Mode Configuration on page 62).
ABS is set to Off-Road – the warning
light will flash slowly (see Riding
Mode Configuration on page 62).
Note:
Traction control, optimised cornering
traction control (if equipped) and
cruise control (if equipped) may not
function if there is a malfunction
with
the
ABS
system.
situation, the warning lights for the
ABS, traction control and the MIL
may be illuminated.
If the warning light becomes illuminated
at any other time while riding it indicates
that the ABS has a malfunction that
requires
investigation.
following warning messages may be
displayed:
WARNING - ABS SYSTEM DISABLED
ABS SYSTEM - CORNERING ABS
DISABLED (models equipped with
optimised cornering ABS only).
The braking system will be affected as
follows:
WARNING - ABS SYSTEM DISABLED
2
first
6 mph
50
or Riding
1.
ABS warning light
2. Instrument message
The message WARNING - ABS SYSTEM
DISABLED indicates that the ABS (and
optimised cornering ABS if equipped) is
not functioning.
If the ABS is not functioning or has
In
this
been disabled by the rider (see Bike
Setup on page
Configuration on page 62), the brake
system will continue to function as a
non-ABS braking system.
Do not continue to ride for longer
than is necessary with the warning
One
of
the
light illuminated. In the event of a
fault, contact an authorised Triumph
dealer as soon as possible to have the
fault checked and rectified.
In this situation, braking too hard will
cause the wheels to lock resulting in
loss of motorcycle control and an
accident.
General Information
1
OFF-ROAD
WARNING
ABS SYSTEM
DISABLED
CHECK MANUAL
PRESS SELECT
TO CLEAR
Warning
50
or Riding Mode
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents