Triumph Explorer Owner's Handbook Manual page 109

Check:
Fuel: Adequate supply in tank, no fuel
leaks (page 87).
Engine Oil: Correct level visible at sight
glass. Add correct specification oil as
required. No leaks from the engine or oil
cooler (page 138).
Final Drive: No oil leaks (page 145).
Tyres/Wheels: Correct inflation pressures
(when cold). Tread depth/wear, tyre/wheel
damage, punctures etc. (page 155).
Nuts, Bolts, Fasteners: Visually check
that steering and
components, axles, and all controls are
properly tightened or fastened. Inspect
all areas for loose/damaged fixings.
Steering Action: Smooth but not loose
from lock to lock. No binding of any of
the control cables (page 149).
Brakes: Pull the brake lever and push the
brake pedal to check
resistance. Investigate any lever/pedal
where the travel is excessive before
meeting resistance, or if either control
feels spongy in operation (page 145).
ABS: Ensure that the ABS warning light
does not remain illuminated at speeds
above 6 mph (10 km/h) when moving off
(page 25).
General Information
Brake Pads: There should be more than
1.5 mm of friction material remaining on
all the pads (page 145).
Brake Fluid Levels: No brake and clutch
fluid leakage. Brake fluid levels must be
between the MAX and MIN marks on
both reservoirs (page 147).
Front Forks: Smooth action. No leaks
from fork seals (page 150).
Throttle: Throttle grip free play 2 - 3 mm.
Ensure that the throttle grip returns to
the idle
(page 74).
suspension
Clutch Fluid Level: No brake and clutch
fluid leakage. The clutch fluid level must
be between the MAX and MIN marks on
the reservoir (page 144).
Coolant: No coolant leakage. Check the
coolant level in the expansion tank
(when the engine is cold) (page 141).
Electrical Equipment: All lights and the
for correct
horn function correctly (page 68).
Engine Stop: Stop switch turns the
engine off (page 112).
Stands: Returns to the fully up position
by spring tension. Return springs not
weak or damaged (page 92).
position without sticking
109