Bike Setup - Triumph Explorer Owner's Handbook Manual

General Information
Press the SCROLL button to select
ENABLE or DISABLE.
TRIP 2 DISPLAY
ENABLE
Trip 2 Display - (ENABLE Shown)
Press the SELECT button to confirm
your selection and return to the TRIP
SETUP menu.
Auto Reset
Note:
• The AUTO RESET function applies to
TRIP 2 only. TRIP 1 must be reset
manually using TRIP 1 RESET as
described on page 49, or the Trip
Meter Reset method described on
page 46.
After entering the AUTO RESET setup
screen, the instruments will prompt you
to select OFF, 1 HR, 2 HRS, 4 HRS or
8 HRS.
AUTO RESET
4 HRS
Auto Reset
Press the SCROLL button until the
desired setting is displayed.
Press the SELECT button to confirm
your selection and return to the TRIP
SETUP menu.
After the ignition as been switched off
and the set time has elapsed, all items
within Trip 2 will be reset to zero.
50

Bike Setup

Access the settings menu as described
on page 48 and select BIKE SETUP.
After entering the BIKE SETUP menu,
press and release the SCROLL button
until the desired item is highlighted.
Press the SELECT button to enter the
item.
BIKE SETUP
EXIT
TSAS
HILL HOLD
INDICATORS
ABS
TC
Bike Setup Menu -
Explorer XR Shown
T