Triumph Explorer Owner's Handbook Manual page 67

TSAS (if fitted and Riding Modes Link
Enabled)
After entering the TSAS screen, press
the SCROLL button to select the desired
TSAS mode.
TSAS
AUTO
TSAS Screen (Auto Selected)
Press the SELECT button to confirm
your selection and progress to the TSAS
settings screen.
The instruments will now prompt for a
TSAS damping setting.
Note:
• If the TSAS mode has been set to
AUTO, the instruments will prompt
for damping settings
on-road and off-road
conditions.
TSAS has nine damping settings ranging
from COMFORT (soft) to SPORT (firm).
Pressing and releasing the SCROLL
button allows individual selection of
each of the nine settings.
Pressing and holding
buttons allows direct selection of the
preset C (Comfort), N (Normal) and
S (Sport) settings.
C N S
OFF-
ROAD
TSAS Damping Setting Screen
(OFF-ROAD shown)
Press the SELECT button to confirm
your selection
configuration menu.
RESET
After entering the RESET screen, the
instruments will prompt you to select
CONFIRM or CANCEL.
Use the SCROLL button to select
CONFIRM or CANCEL. Press the SELECT
button to confirm your selection and
return to the configuration menu.
Selecting
selected riding mode's configuration to
the factory default settings.
for both
Refer to the table on page
riding
of the factory default settings for each
riding mode.
the SCROLL
General Information
and return to
RESET
CONFIRM
Riding Mode Reset
CONFIRM will return
62 for details
the
the
67