Bulb Replacement; Headlights - Triumph Explorer Owner's Handbook Manual

Bulb Replacement

Caution
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
In addition, the use of bulbs of
incorrect wattage may cause the
chassis ECM to cut power to affected
lighting circuits.
Use genuine Triumph supplied bulbs
as specified in the Triumph Parts
Catalogue.
Always have replacement
installed by an authorised Triumph
dealer.

Headlights

It is not necessary to remove the
headlight when bulb
becomes necessary.
cgjn
1. Bulb retainer (right hand shown)
2. Bulb retainer hook
3. Bulb
Maintenance and Adjustment
The bulbs become hot during use.
Always allow sufficient time for the
bulb to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty,
clean with alcohol before reuse.
To replace a bulb:
Remove the rider's seat.
Disconnect the battery, negative (black)
lead first.
Remove the bulb cover from the bulb to
bulbs
be replaced by rotating it anticlockwise.
Disconnect the multiplug from the bulb.
Detach the bulb retainer from the hook
on the headlight assembly and rotate it
away from the bulb as shown.
Remove the bulb from the bulb retainer.
replacement
Installation is the reverse of the removal
procedure.
3
1
2
Warning
171