Triumph Explorer Owner's Handbook Manual page 54

General Information
Press the SELECT button to confirm
your selection and return to the TSAS
menu.
See page 62 for more information on
riding mode configuration.
Off-Road
The TSAS off-road mode can set to one
of the following conditions:
• Enabled - TSAS is set to off-road
mode.
• Auto - The TSAS
automatically detect the type of
surface being ridden (on-road or
off-road) and will adjust rebound
and compression damping settings
accordingly.
After entering the OFF-ROAD menu,
press the SCROLL button to select
DISABLE, ENABLE or AUTO.
Press the SELECT button to confirm
your selection and return to the TSAS
menu.
Note:
• If the TSAS Modes Link is enabled,
any changes will be automatically
stored to the currently selected
riding mode.
54
Hill Hold - Explorer XR
Explorer XC
After entering the HILL HOLD screen
press the SCROLL button to select
ENABLE or DISABLE.
Hill Hold (ENABLE Shown)
system will
Press the SELECT button to confirm
your selection and return to the BIKE
SETUP menu.
See page
hill hold function.
Indicators - All Models Except
Explorer XR and Explorer XC
After entering the INDICATORS screen
press the SCROLL button to select AUTO
or MANUAL.
INDICATORS
Indicator Self Cancelling
Press the SELECT button to confirm
your selection and return to the BIKE
SETUP menu.
See Automatic Self-cancelling Indicators
on page 72
and
T
Models Only
A
HILL HOLD
ENABLE
121 for more information on the
AUTO
(AUTO Shown)
for more information.