Warning And Information Messages - Triumph Explorer Owner's Handbook Manual

Warning and Information
Messages
Warning Messages
The following
messages may be displayed if
a fault is detected:
• OIL PRESSURE LOW (see page 32)
• BATTERY LOW (see page 24)
• ABS SYSTEM DISABLED (see page 25)
• CORNERING ABS DISABLED
(see page 25)
• TC SYSTEM DISABLED (see page 28)
• CORNERING TC DISABLED
(see page 28)
• TSAS SYSTEM FAULT (see page 33)
• FRONT/REAR TYRE PRESSURE LOW
(see page 32)
• SENSOR SIGNAL FRONT/REAR TYRE
(see page 84).
Information Messages
The following
messages may be displayed:
• TSAS SYSTEM CALIBRATING -
PLEASE WAIT (see page 33)
• TPMS - BATTERY LOW FRONT/REAR
TYRE (see page 33)
• HILL HOLD ACTIVATED (see page 121)
• HILL HOLD DEACTIVATED
(see page 121)
• HILL HOLD UNAVAILABLE
(see page 121).
When a warning or information message
is activated, the message
accompanied by the relevant warning or
information symbol on the left hand side
of the multifunction display.
General Information
It is possible for multiple warning and
information messages to be displayed
when a fault occurs. Where this is the
case, warning messages will take priority
over information messages and the
Warning
warning symbol will be displayed on the
left hand side of the multifunction
display.
The number of currently active warning
and information messages is displayed
over the warning/information symbol.
1
1. Symbol (warning symbol shown)
information
2. Multiple messages indicated
Use the SCROLL button to scroll through
the messages being displayed.
Press the
acknowledge and hide each message.
will be
2
OFF-ROAD
3
WARNING
TTC SYSTEM
SELECT button to
35