Settings Menu - Triumph Explorer Owner's Handbook Manual

Table of Contents

Advertisement

General Information
Instantaneous Fuel Consumption
An indication of the fuel consumption at
an instant in time. If the motorcycle is
stationary, --.- will be visible in the
display area.
Odometer
Shows the total distance that the
motorcycle has travelled.
Front and Rear Tyre Pressures (If TPMS
is fitted, see page 84)
The front and rear tyre pressures are
displayed.
Dashes will be displayed in the tyre
pressure display until the motorcycle
reaches
a
speed
of
12 mph (20 km/h).
Warning
When the motorcycle is in motion, only
attempt
to
switch
between
information and trip meter display
modes or reset the trip meter under
the following conditions:
At low speed
In traffic-free areas
On straight and level roads or
surfaces
In
good
road
and
conditions.
Failure to observe this important
warning
could
lead
motorcycle control and an accident.
48

Settings Menu

To access the settings menu; with the
motorcycle stationary, press and hold
the SELECT button on the left hand
switch housing until the settings menu
is displayed in the multifunction display
screen.
Press and release the SCROLL button
until the desired item is highlighted.
Press the SELECT button to enter the
item's sub menu.
approximately
the
The following menu items are available
for selection:
EXIT
SHOW WARNINGS (see page 49)
weather
RIDING MODES (see page 49)
TRIP SETUP (see page 49)
BIKE SETUP (see page 50)
DISPLAY SETUP (see page 55).
to
loss
of
Each menu item can be edited as follows:
Note:
Selecting EXIT will return the display
to the home screen.
SETTINGS
EXIT
SHOW WARNINGS
RIDING MODES
TRIP SETUP
BIKE SETUP
DISPLAY SETUP
Settings Menu

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents