Triumph Explorer Owner's Handbook Manual page 53

After entering the TC screen press the
SCROLL button to select ENABLE or
DISABLE.
TC
ENABLE
TC (ENABLE Shown)
Press the SELECT button to confirm
your selection and return to the BIKE
SETUP menu.
If DISABLE is selected, the TC disabled
warning light will be illuminated and the
message WARNING -
DISABLED will be briefly displayed in the
multifunction display screen.
TC, optimised cornering TC (if equipped)
and all riding mode TC settings will be
disabled until TC is re-enabled.
TC, optimised cornering TC (if equipped)
and the riding mode TC settings will be
automatically enabled when the ignition
is turned OFF and then ON again.
General Information
TSAS Menu (if fitted)
After entering the TSAS screen, press
the SCROLL button until the desired item
is highlighted. Press the SELECT button
to enter the item.
TC SYSTEM
Note:
• Selecting EXIT will return the display
to the BIKE SETUP menu.
TSAS Modes Link
The TSAS system settings can be linked
to the riding mode system. This allows
the rider to set different TSAS settings
for each riding mode, during riding mode
configuration.
When a riding mode is selected, the
TSAS settings for that riding mode will
be automatically recalled and activated.
To enable or disable the TSAS modes link,
after entering the MODES LINK screen,
press the SCROLL button to select
ENABLE or DISABLE.
TSAS
EXIT
MODES LINK
OFF-ROAD
TSAS Menu
MODES LINK
ENABLE
Riding Modes Link
(ENABLE Shown)
53