Triumph Explorer Owner's Handbook Manual page 65

Note:
• During riding mode configuration,
ABS and TC can be activated or
de-activated in the Off-Road and
Rider modes.
• If the riding mode being configured is
currently selected, adjustments to
the ABS, MAP, TC and TSAS systems
will become immediately active.
• If the riding mode being configured is
not currently selected, adjustments
to the ABS, MAP, TC and TSAS
systems are saved and will become
active the next time the riding mode
is selected.
To configure a riding mode, with the
motorcycle stationary, press and hold
the SELECT button to activate the
Settings Menu. Use the SCROLL button
to select RIDING MODES then press the
SELECT button to enter the Riding
Modes menu.
RIDING MODES
EXIT
RAIN
ROAD
SPORT
OFF-ROAD
RIDER
Riding Modes Menu
Use the SCROLL button to highlight the
riding mode to be configured, then press
SELECT to enter the riding mode's
configuration menu.
General Information
Alternatively, pressing and holding the
MODE button will provide direct access
to a riding mode's configuration menu as
follows:
From the Home Screen
Pressing and holding the MODE button
while in the Home screen will activate
the configuration menu for the currently
active riding mode.
From the Riding Mode Selection Menu
Pressing and holding the MODE button
while in the Riding Mode selection menu
will activate the configuration menu for
the riding mode highlighted for selection.
OFF-ROAD
EXIT
ABS
MAP
TC
TSAS
RESET
Configuration Menu
(Off-Road Mode Selected)
After entering a riding
configuration menu, press the SCROLL
button until the desired
highlighted. Press the SELECT button to
enter the item's settings.
Note:
• Selecting EXIT will return the display
to the Riding Modes menu.
mode's
item is
65