Triumph Explorer Owner's Handbook Manual page 83

Warning
If the TC system is not functioning,
care must be taken when accelerating
and cornering on wet/slippery road
surfaces to avoid rear wheel spin.
In the event of a fault, the TC disabled
warning light may be accompanied by
the engine management
malfunction indicator light and/or the
ABS warning light.
Do not continue to ride for longer
than is necessary with any of the
above warning lights
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.
General Information
If a fault occurs with the optimised
cornering TC system, the TC disabled
warning light will illuminate and the
message TC SYSTEM - CORNERING TC
DISABLED will be displayed in the
multifunction display.
system In this situation, the TC system will
continue to operate but without the
optimised cornering function, provided
that:
• There are no other faults with the
illuminated. TC system.
• TC has NOT been disabled by the
rider (see Bike Setup on page
Riding
page 62).
Care must be taken when accelerating
and cornering on wet/slippery road
surfaces to avoid rear wheel spin.
In the event of a fault, the TC disabled
warning light may be accompanied by
the engine
malfunction indicator light and/or the
ABS warning light.
Do not continue to ride for longer
than is necessary with any of the
above
Contact an authorised Triumph dealer
as soon as possible to have the fault
checked and rectified.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.
See page
disabled warning light operation and its
associated instrument warning messages.
Warning
50
Mode Configuration
management system
warning lights illuminated.
28 for full details of the TC
or
on
83