Deactivation; Hill Hold Unavailable Message - Triumph Explorer Owner's Handbook Manual

The rear brake will remain applied until:
• The system detects that the rider is
attempting to move off.
• Hill hold control
deactivated by the rider.

Deactivation

The hill hold control
automatically deactivate when it detects
that the rider is attempting to move off.
The system will progressively release the
rear brake to assist the rider in moving
off.
The hill hold control system can also be
manually deactivated by a second firm
squeeze of the front brake lever.
The message HILL HOLD DEACTIVATED
will be displayed briefly
multifunction display.
1
OFF-ROAD
HILL HOLD
H
DEACTIVATED
1. Instrument message
How to Ride the Motorcycle

Hill Hold Unavailable Message

1
is manually
system will
If when attempting to activate the hill
hold control system, the message HILL
HOLD UNAVAILABLE - CHECK MANUAL is
displayed, this indicates one or more of
in the
the following:
• The activation conditions described
on page
• There is a fault with the ABS or
engine management systems and
the ABS and/or MIL warning lights
are illuminated. See Warning Lights
on page 24.
The hill hold control system can be
enabled or disabled (see Bike Setup on
page 50).
OFF-ROAD
HILL HOLD
H
UNAVAILABLE
CHECK MANUAL
122 have not been met.
123