Snmpv3 Communities - HP ProCurve 6400cl Series Management And Configuration Manual

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
14-12

SNMPv3 Communities

SNMP commuities are supported by the switch to allow management applica­
tion that use version 2c or version 1 to access the switch. The communities
are mapped to Group Access Levels that are used for version 2c or version 1
support. For more information see "Group Access Levels" on page 14-11. This
mapping will happen automatically based on the communities access privi­
leges, but special mappings can be added with the snmpv3 community com­
mand.
Syntax: [no] snmpv3 community
This command maps or removes a mapping of a
community name to a group access level. To remove a
mapping you, only need to specify the index_name
parameter.
index <index_name>
This is an index number or title for the mapping. The
values of 1-5 are reserved and can not be mapped.
name <community_name>
This is the community name that is being mapped to a
group access level.
sec-name <security_name>
This is the group level that the community is being
mapped. For more information see "Group Access
Levels" on page 14-11.
tag <tag_value>
This is used to specify which target address may have
access by way of this index reference.