Figure 14-13. Example of Displaying the Global and Per-Port Information Available for Outbound
Advertisements
For example, in the default configuration, the switch information currently
available for outbound LLDP advertisements appears similar to the display in
figure 14-13 on page page 14-45.
Figure 14-14. Example of the Default Per-Port Information Content for Ports 1 and 2
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
The Management Address field displays only
the LLDP-configurable IP addresses on the
switch. (Only manually-configured IP
addresses are LLDP-configurable.) If the
switch has only an IP address from a DHCP or
Bootp server, then the Management Address
field is empty (because there are no LLDP
configurable IP addresses available). For more
on this topic, refer to "Remote Management
Address" on page 14-30.
14-45