HP ProCurve 6400cl Series Management And Configuration Manual page 183

• Use the Space bar to select the
[>]
i. Press to move the cursor to the
ii. Enter the IP address of the TimeP server you want the switch to
use for time synchronization.
Note: This step replaces any previously configured TimeP server
IP address.
[>]
iii. Press to move the cursor to the
6.
5. In the field, enter the time in minutes that you want for a TimeP
Poll Interval
Poll Interval.
Press to return to the Actions line, then
[Enter]
time protocol configuration in both the startup-config and running-config
files.
TimeP: Viewing, Selecting, and Configuring
mode.
Manual
field.
Server Address
field, then go to step
Poll Interval
(for ) to enter the new
[S] Save
Time Protocols
9-17