Overview - HP ProCurve 6400cl Series Management And Configuration Manual

Port Status and Basic Configuration

Overview

Note On Connecting
Transceivers to
Fixed-Configuration
Devices
10-2
Overview
This chapter describes how to view the current port configuration and how
to configure ports to non-default settings, including
■ Enable/Disable
Mode (speed and duplex)
■
■ Flow Control
■ Broadcast Limit
Viewing Port Status and Configuring Port
Parameters
Port Status and Configuration Features
Feature
viewing port status
configuring ports
configuring hp auto-mdix
If the switch either fails to show a link between an installed transceiver and
another device, or demonstrates errors or other unexpected behavior on the
link, check the port configuration on both devices for a speed and/or duplex
(mode) mismatch. To check the mode setting for a port on the switch, use
either the Port Status screen in the menu interface (page 10-6) or show
interfaces brief in the CLI (page 10-8).
Default Menu
n/a page 10-6
Refer to Table page 10-7
10-1 on pages
10-3 thru 10-5
CLI Web
page 10-8 page 10-18
page 10-9 page 10-18
page 9-11