Port Status and Basic Configuration
Using Friendly (Optional) Port Names
10-20
Configuring Friendly Port Names
Syntax: interface < port-list > name < port-name-string >
Assigns a port name to port-list.
Syntax: no interface < port-list > name
Deletes the port name from port-list.
Configuring a Single Port Name. Suppose that you have connected port
A3 on the switch to Bill Smith's workstation, and want to assign Bill's name
and workstation IP address (10.25.101.73) as a port name for port A3:
Figure 10-12. Example of Configuring a Friendly Port Name
Configuring the Same Name for Multiple Ports. Suppose that you want
to use ports A5 through A8 as a trunked link to a server used by a drafting
group. In this case you might configure ports A5 through A8 with the name
"Draft-Server:Trunk".
Figure 10-13. Example of Configuring One Friendly Port Name on Multiple Ports