HP ProCurve 6400cl Series Management And Configuration Manual page 343

Figure 14-15. Example of a Global Listing of Discovered Devices
Figure 14-16. Example of a Connection to a Device Transmitting Both LLDP and CDP Advertisements
The data shown in the entry for port 7 was translated from a CDP advertisement from a
5300xl switch with LLDP disabled. (Not all fields expected by LLDP on the receiving switch
are populated by CDP data.)
Port 11 is connected to port B1 on a neighbor 5300xl switch that is transmitting both LLDP
and CDP advertisements. Because the ChassisId and PortId values in the advertisements
don't match, there are two entries for the same device. The first entry for port 11 shows
the LLDP data from the 5300xl's port B1. The second entry for port 11 shows the CDP data
from the same port B1. (For definitions of the fields in this display, refer to table 14-2,
"Viewable1 Data Available for LLDP Advertisements" on page 14-29.)
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
The data shown for port 3 was translated from a
CDP advertisement from a 5300xl switch with
LLDP disabled. (Not all fields expected by the
LLDP device are populated with the CDP data.)
Note: In software releases earlier than M_08_06x
(for the 3400cl switches only), a Port Type column
appears with this command instead of the PortId,
PortName columns shown in this figure.
14-47