HP ProCurve 6400cl Series Management And Configuration Manual page 51

Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.
Reminder to
reboot the switch
to activate
configuration
changes.
N o t e
Rebooting To Activate Configuration Changes. Configuration changes
for most parameters in the menu interface become effective as soon as you
save them. However, you must reboot the switch in order to implement a
change in the
Maximum VLANs to support parameter
to the Main Menu and select:
2. Switch Configuration
8. VLAN Menu
1. VLAN Support
If you make configuration changes in the menu interface that require a reboot,
the switch displays an asterisk (*) next to the menu item in which the change
has been made. For example, if you change and save the value for the
parameter, an asterisk appears next to the
VLANs to support
the VLAN Menu screen, and also next to the
Main Menu, as shown in figure 4-6:
Figure 3-7. Indication of a Configuration Change Requiring a Reboot
To activate changes indicated by the asterisk, go to the Main Menu and select
the option.
Reboot Switch
Executing the
write memory
configuration changes indicated by an asterisk in the menu interface. That is,
only a reboot from the menu interface or a
CLI will activate a pending configuration change indicated by an asterisk.
. (To access this parameter, go
.)
Switch Configuration ...
command in the CLI does not affect pending
or
boot
Using the Menu Interface
Rebooting the Switch
Maximum
entry in
VLAN Support
entry in the
command from the
reload
3-13