Port Status and Basic Configuration
Viewing Port Status and Configuring Port Parameters
Figure 10-11. Example of Displaying the Current MDI Operating Mode
N o t e
10-18
Upgrading the Switch Series 5300xl Operating System from E_07.XX
or earlier:
Copper ports in auto-negotiation still default to auto-mdix mode.
1.
2.
Copper ports in forced speed/duplex default to mdix mode.
For a fresh installation of the operating system, auto-mdix is the default.
Web: Viewing Port Status and Configuring Port
Parameters
In the web browser interface:
Click on the Configuration tab.
1.
2.
Click on
[Port Configuration]
3.
Select the ports you want to modify and click on
4.
After you make the desired changes, click on
Note that the web browser interface displays an existing port trunk group.
However, to configure a port trunk group, you must use the CLI or the menu
interface. For more on this topic, refer to chapter 12, "Port Trunking" .
.
[Apply Settings]
Per-Port MDI
Operating Mode
[Modify Selected Ports]
.
.