N o t e
Using the Menu To Configure Ports.
The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, refer to chapter
12, "Port Trunking" .
1.
From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
Figure 10-3. Example of Port/Trunk Settings with a Trunk Group Configured
(for Edit). The cursor moves to the Enabled field for the first port.
2.
Press
[E]
3. Refer to the online help provided with this screen for further information
on configuration options for these features.
4. When you have finished making changes to the above parameters, press
, then press
[Enter]
Viewing Port Status and Configuring Port Parameters
(for Save).
[S]
Port Status and Basic Configuration
10-7