5.2 Connecting the Instrument to your Computer
The Model 6292 is supplied with a USB cable (Cat. #2140.46) necessary for
connecting the instrument to the computer.
To connect the instrument to your computer, connect one end of the USB cable
to the communications port (see Figure 2-1, item 14) on the Model 6292 and the
other end to an available USB port on the computer.
5.3 Establishing Communication to the Instrument
■ Double-click the Micro-Ohmmeter Icon that was created during software
installation, located in the DataView folder on the desktop, to open the
Micro-Ohmmeter Control Panel.
■ From the main menu select Instrument and then click Connect to open the
Connection dialog box.
■ The instrument name should appear in the Communication Port field. If not,
select it from the drop-down list. Ensure that the Instrument model field is set
to 6292, and the Communication rate is set to 57600. Then click OK.
NOTE: The connection status can be seen in the lower right-hand corner of the
Control Panel and in the Instrument window under status.
Micro-ohmmeter Model 6292
Figure 5-5
33