Connecting The Instrument To Your Computer - AEMC 6240 User Manual

16. Once connected, the Found New Hardware dialog box will appear.
Windows will complete the driver installation process automatically.
Shortcuts for DataView
the installation process have been added to your desktop.
NOTE: If you connected your instrument to the computer before installing
the software and drivers, you may need to use the Add/Remove Hardware
utility to remove the instrument driver before repeating the process.
5.3

Connecting the Instrument to your Computer

The Model 6240 is supplied with a USB interface cable
necessary for connecting the instrument to the computer. This cable is
equipped with a type-A USB connector on one end and an optical connec-
tor on the other end, thus providing the ability to interface with computers
that have USB connectors.
To connect the instrument to your computer:
• Connect the optical connector end of the cable to the optical
communications port on the front panel of the Model 6240.
• Connect the type-A USB end of the cable to an available USB port
on your computer.
The first time this cable is connected to the computer, Windows will install
the drivers for it. Once this has finished, the system is ready to communi-
cate using the DataView
Micro-Ohmmeter Model 6240
and each instrument control panel selected during
®
software with the micro-ohmmeter.
®
(Cat. #2135.41)
27