Table 14 Analog Input Configuration Parameters - Honeywell HC900 Reference Manual

Configuration parameters
Parameter Index #
N/A
Block Order
Rack
Address
I/O Module
Address
Channel
Address
N/A
Input Type
and Range
Revision 11
2/07

Table 14 Analog Input configuration parameters

Parameter Description
Execution Order for Block
This is the address of the selected
Rack.
Address of selected I/O module (must
match model selection guide)
Channel on selected I/O Module
Thermocouple Input types
RTD Input types
Linear Input types
Special Input Types - Carbon or
Oxygen
HC900 Hybrid Control Designer Function Block Reference Guide
Value or Selection
Read Only. To
change block order,
right-click on a
Function Block and
select Execution
Order.
Enter a value
from 1 to 5.
Enter a value:
from 1 to 12
Enter a value:
from 1 to 8 or 16.
Click on the "Input
Type and Range"
group button and
select an input from
list box.
See T able 15 for
H
Input Type and
Range
Function Blocks
AI Function Block
43