Wvar Write Variable Function Block - Honeywell HC900 Reference Manual

Function Blocks

WVAR Write Variable Function Block

WVAR Write Variable Function Block
Description
The WVAR label stands for Write Variable.
This block is part of the Auxiliary category.
Function
Writes a new value to a selected Variable number.
Select the target variable number from the specific function block reference data and enter it in the
appropriate field in the "Write Variable Number" dialog box.
If EN is ON, then the Variable selected is set to the value of X.(For example: X = a constant value)
•
Inputs
X = Value to be written to the selected variable
EN = Enable command
Target write variable number
Double click on the function block to access the "Write Variable Number" dialog box.
Enter the Target Variable number in the appropriate field. Selections are from 1 to 600.
434 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07