Function Blocks
ALMGR Alarm Group Function Block
5. Repeat the selection for up to 12 tags for each group.
6. Select a signal in the "Selected Tags" field and click on ALARM DETAILS, and enter Alarm details
in the Dialog Box.
7. Click OK.
You can also select "Alarms" from:
- the EDIT menu on the Hybrid Control Designer Main Menus
- The O/I Worksheet Toolbar button
- the FBD Worksheet toolbar button
Example
54
(when you have an O/I)
(when you do not have an O/I and do not need to use
Alarm Group logic in the control strategy)
Figure 11 ALMGR Function Block Example
HC900 Hybrid Control Designer Function Block Reference Guide
Revision 11
2/07