Denc Digital Encoder Function Block - Honeywell HC900 Reference Manual

DENC Digital Encoder Function Block

Description
The DENC label stands for Digital Encoder.
This block is part of the Auxiliary category.
Function
This block's main function is to totalize the number of ON states from up to 16 digital signals. The block
digitally encodes up to 16 digital inputs to a single floating point output value.
Forcing of the output is not permitted.
Inputs
Sixteen digital inputs: Example: ON causes the input to be included in the total output. Unconnected pins
default to OFF.
IN 1 = Digital Input 1
IN 2 = Digital Input 2
IN 3 = Digital Input 3
IN 4 = Digital Input 4
IN 5 = Digital Input 5
IN 6 = Digital Input 6
IN 7 = Digital Input 7
IN 8 = Digital Input 8
Revision 11
2/07
HC900 Hybrid Control Designer Function Block Reference Guide
DENC Digital Encoder Function Block
IN 9 = Digital Input 9
IN 10 = Digital Input 10
IN 11 = Digital Input 11
IN 12 = Digital Input 12
IN 13 = Digital Input 13
IN 14 = Digital Input 14
IN 15 = Digital Input 15
IN 16 = Digital Input 16
Function Blocks
131