Honeywell HC900 Reference Manual page 276

Function Blocks
PDW Peer Data Write Function Block
Configuration Parameters
Edit Input Pins
Parameter Index #
N/A
Write
Variable
N/A
Variable
Number
262
Parameter Description
Activates the WR1 through
WR8 pins for writes.
Variable number that
appears on the Tag
Information Report.
See "Tag Information
Example".
HC900 Hybrid Control Designer Function Block Reference Guide
Value or Selection
Click on selection box next to the pin
number.
Enter a variable number from the
report.
You can also use the "Find a
Signal tag" procedure to find the
variable number.
Revision 11
2/07