Sqrt Function Block - Honeywell HC900 Reference Manual

Function Blocks

SQRT Function Block

SQRT Function Block
Description
The SQRT label stands for Square Root .
This block is part of the Calculations category.
Function
Extracts the square root of the analog input (X) as long as the input is greater than the configured
DROPOFF value.
If X > DROPOFF, then: OUT = square root of X.
•
Otherwise, OUT = 0.
•
Input
X = Analog value for square root extraction
Output
OUT = Square Root value
Block properties
Double click on the function block to access the function block properties dialog box.
362 HC900 Hybrid Control Designer Function Block Reference Guide Revision 11
2/07