Table 109 Stg Stage Tabs Parameters - Honeywell HC900 Reference Manual

Properties Group
Label
Settings
Type
Interlocking
On Compare PV
SP
Compare
Type
Latch Delay
Off Compare PV
SP
Compare
Type
Latch Delay
Revision 11
2/07

Table 109 STG Stage Tabs parameters

Parameter Index #
N/A
N/A
N/A
N/A
N/A
12 - 15
N/A
28 - 31
N/A
16 - 19
N/A
32 - 35
HC900 Hybrid Control Designer Function Block Reference Guide
Parameter Description
Unique name for each of the 4
internal stage functions
See "Stage Types" for definitions
and T able 108 for associated
H
parameters
When set to ON, the current stage
is interlocked to the previous
stage
When set to ON, the current stage
is interlocked to the next stage
Defines PV1 or PV2 as the source
for the comparison to SP ON.
Setpoint used with ON comparator
Comparison type operator
between PV ON and SP ON.
Delay prior to latching the output
ON
Defines PV1 or PV2 as the source
for the comparison to SP OFF.
Setpoint used with OFF
comparator
Comparison type operator
between PV OFF and SP OFF.
Delay prior to unlatching the
output OFF
Function Blocks
STG Stage Function Block
Value or Selection
8 Characters
Pressure/Flow
Pump Down
Pump UP
User Configured
Default =
Pressure/Flow
ON = Interlock
OFF = No Interlock
Default = OFF
ON = Interlock
OFF = No Interlock
Default = OFF
See T able 108 for
H
defaults.
No range limits
Can be changed from
an operator interface
See T able 108 for
H
defaults.
Range:
0 – 9999 seconds
See T able 108 for
H
defaults.
No range limits
Can be changed from
an operator interface
See T able 108 for
H
defaults.
Range:
0 – 9999 seconds
369