Detailed Explanation Of Setting Data - Mitsubishi Electric MELSEC FX3U Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition

34.5.1 Detailed explanation of setting data

Details of the setting data in the FLCMD instruction are as shown below.
Setting items
S
n
*1. The CompactFlash
*2. The CompactFlash
Cautions
• It is not permitted to use an RS (FNC 80)/RS2 (FNC 87)/IVCK (FNC270)/IVDR (FNC271)/IVRD (FNC272)/
IVWR (FNC273)/IVBWR (FNC274) instruction and an FLCRT (FNC300)/FLDEL (FNC301)/
FLWR (FNC302)/FLRD (FNC303)/FLCMD (FNC304)/FLSTRD (FNC305) instruction for the same port.
798
Contents of instruction for operation
K0 to K63 : Forcibly writes the buffered data of the specified file ID to the CompactFlash
card.
K-1 : Forcibly writes all buffered data to the CompactFlash
K256(H100) : Sets the CompactFlash
K512(H200) : Sets the CompactFlash
K1280(H500) : Clears error codes stored in the CF-ADP.
Channel number used by the CF-ADP
K1 : ch1
K2 : ch2
TM
card is available in the "mounted" status.
TM
card is unavailable in the "unmounted" status.
34 FX3U-CF-ADP Applied Instructions – FNC300 to FNC305
34.5 FNC 304 – FLCMD / FX3U-CF-ADP command
Description
TM
card.
TM
card to the mounted status
TM
card to the unmounted status
Data Type
TM
16-bit binary
*1
.
*2
.
16-bit binary