Appendix A-3-2 Version Check; Appendix A-3-3 Version Upgrade History [Fx 3G ]; Appendix A-3-4 Version Upgrade History [Fx 3U ] - Mitsubishi Electric MELSEC FX3U Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition

Appendix A-3-2 Version check

Special data register D8001 (decimal) contains information for determining the PLC version. Or for the FX
FX and FX
3U 3UC
PLC type and
Appendix A-3-3 Version upgrade history [FX
Manufacturer's
Version
serial number
Ver.1.00
(June, 2008)
Ver.1.10
(October, 2008)
Ver.1.20
(June, 2009)
Appendix A-3-4 Version upgrade history [FX
Manufacturer's
Version
serial number
Ver.2.20
(May, 2005)
Ver. 2.30
(November, 2005)
Ver. 2.61
(July, 2009)
PLCs, the PLC version can be verified in "PLC Status" within the display module.
refer to the Hardware Edition Manual of the PLC to be checked.
D8001
2 4
version
PLC type (Example: 24 = FX
86****
First product
• Supports following instructions:
FLT(FNC49), VRRD(FNC85), VRSC(FNC86), ECMP(FNC110), EMOV(FNC112),
EADD(FNC120), ESUB(FNC121), EMUL(FNC122), EDIV(FNC123),
ESQR(FNC127), INT(FNC129), IVCK(FNC270), IVDR(FNC271), IVRD(FNC272),
8X**** IVWR(FNC273)
• Supports connection of FX
• Supports connection of display module (FX
• Supportsthe floating point operation function
• Supports the inverter communication function.
• Supports the pulse width/pulse period measurement function.
• Supports connection of following analog special adapters:
96****
- FX -3A-ADP
3U
• Supports the hardware error function of FX
→ For the manufacturer' serrial number check method, refer to Appendix A-3-1.
55**** First product (supporting the functions described as "Ver.2.20 or later" in this manual)
Corresponds to FX
• Adding the following instructions and function up.
5Y****
- Adding MEP and MEF instructions
- Function up of MUL (FNC 22), DIV (FNC 23), and RS2 (FNC 87) instructions
• Supports following 6 instructions:
FLCRT(FNC300), FLDEL(FNC301), FLWR(FNC302), FLRD(FNC303),
FLCMD(FNC304), FLSTRD(FNC305)
97****
• Supports connection of following analog special adapters:
- FX -3A-ADP
3U
- FX -CF-ADP
3U
• Supports the hardware error function of FX
→ For the manufacturer' serial number check method, refer to Appendix A-3-1.
A Programming Tool Applicability and Version Upgrade History
→ For the operating procedure of the display module,
1 0 0
Version information (Example: Ver. 1.00)
/FX
2N
]
3G
Contents of version upgrade
-8AV-BD, FX
3G 3G
3G
3U
]
3U
Contents of version upgrade
PLC Ver. 2.20.
3UC
3U
A-3 Version Upgrade History
/FX /FX PLC)
2NC 3U 3UC
-2AD-BD, and FX -1DA-BD.
3G
-5DM).
-4DA-ADP.
-4DA-ADP.
31
,
3G
32
33
34
35
36
37
38
A
B
959