Mitsubishi Electric MELSEC FX3U Programming Manual page 88

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Device name
Constant
Decimal (K)
Hexadecimal (H)
Real number (E)
Character string (" ")
*1. Available device numbers vary depending on the PLC. For details, refer to Section 4.2.
*2. For supported functions, refer to Chapter 37.
For handling of the latched (battery backed) area, refer to Section 2.6.
*3. When the FX
follows:
1 phase: 200 kHz
2 phases: 100 kHz (1 edge count). 100 kHz (4 edge count)
86
−32768 to +32767
16 bits
−2,147,483,648 to +2,147,483,647
32 bits
16 bits 0 to FFFF
32 bits 0 to FFFFFFFF
−1.0 × 2
32 bits
Both the decimal point expression and the exponent
expression are available.
Specify characters by quotation marks.
Character string In a constant of an instruction, up to 32 half-width
characters are available.
-4HSX-ADP is connected to an FX
3U
Description
−126
128
to −1.0 × 2 , 0, 1.0 × 2
PLC, the maximum input frequency is set as
3U
4 Devices in Detail
4.1 Device Number List
Reference
−126
128
Chapter 5
to 1.0 × 2