Mitsubishi Electric MELSEC FX3U Programming Manual page 286

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Related devices
1. Relationship between the flag operation and the sign (positive or negative) of a numeric
value
Device
M8020
M8021
M8022
−2, −1,
−2, −1,
Cautions
1. When using a 32-bit operation instruction (DADD or DADDP)
When specifying word devices, a 16-bit word device on the low-order side is specified first, and a word device
with the subsequent device number is automatically set for the high-order 16 bits.
To prevent number overlap, it is recommended to always specify an even number, for example.
2. When specifying the same device in the source and destination
The same device number can be specified for both the source and the destination.
In this case, note that the addition result changes in every operation cycle if a continuous operation type
instruction (ADD or DADD) is used.
X001
FNC 20
ADD
284
Name
ON : When the operation result is 0
Zero
OFF: When the operation result is not 0
ON : When the operation result is less than −32768 (in 16-bit operation) or
−2,147,483,648 (in 32-bit operation)
Borrow
OFF: When the operation result is not less than −32768 (in 16-bit operation) or
−2,147,483,648 (in 32-bit operation)
ON : When the operation result is more than 32767 (in 16-bit operation) or
2,147,483,647 (in 32-bit operation)
Carry
OFF: When the operation result is not more than 32767 (in 16-bit operation) or
2,147,483,647 (in 32-bit operation)
Zero flag
−32768
0,
The most
Borrow flag
significant bit of
data becomes
"1".
Zero flag
−2,147,483,648
0,
Borrow flag
D 0 K 25
10 Arithmetic and Logical Operation (+, −, ×, ÷) – FNC 20 to FNC 29
→ For the flag operations, refer to Subsection 6.5.2.
Zero flag
−1,
0, 1
The most
significant bit
of data
becomes "0".
−1,
0, 1
Zero flag
D 0
(D 0) + 25→(D 0)
10.1 FNC 20 – ADD / Addition
Description
Zero flag
32767, 0,
Carry flag
Zero flag
2,147,483,647, 0,
Carry flag
1, 2
1, 2