Mitsubishi Electric MELSEC FX3U Programming Manual page 593

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition
Program example
X000
FNC161
TZCP
M3
M4
M5
↑
Even if X000 is OFF and TZCP instruction is not executed, M0
to M2 hold the status before X000 turned OFF.
S S +1 and
,
1 1
S S +1 and S
,
2 2
S , S +1 and
D , D +1 and
The setting range of "hour" is from 0 to 23.
The setting range of "minute" is from 0 to 59.
The setting range of "second" is from 0 to 59.
S S S
1 2
D 20 D 30 D 0
Turns ON in the case of "
Turns ON in the case of "
Turns ON in the case of "
S +2
: Specify the lower limit of the comparison time zone in "hour", "minute" and "second.
1
+2
: Specify the upper limit of the comparison time zone in "hour", "minute" and "second.
2
S +2 : Specify the time data in "hour", "minute" and "second.
D +2 : Turn ON or OFF according to the comparison result.
21 Real Time Clock Control – FNC160 to FNC169
21.2 FNC161 – TZCP / RTC Data Zone Compare
D
M 3
D20 (hour) D0 (hour)
>
D21 (minute) D1 (minute)
D22 (second) D2 (second)
D20 (hour) D0 (hour)
≤
D21 (minute) D1 (minute)
D22 (second) D2 (second)
D0 (hour)
D1 (minute)
D2 (second)
".
D 30 (hour)
≤
".
D 31 (minute)
D 32 (second)
D 30 (hour)
>
".
D 31 (minute)
D 32 (second)
591
21
22
23
24
25
26
27
28
29
30