Detailed Explanation Of Setting Data - Mitsubishi Electric MELSEC FX3U Programming Manual

FX /FX /FX Series Programmable Controllers
3G 3U 3UC
Programming Manual - Basic & Applied Instruction Edition

34.2.1 Detailed explanation of setting data

Details of the setting data in the FLDEL instruction are as shown below.
Setting items
S
1
S
2
n
Cautions
• When the file ID "K0 (FIFO file)" or "K-1 (all files)" is specified, it may take approximately 1 minute to delete
the files depending on the number of stored files.
• It is not permitted to use an RS (FNC 80)/RS2 (FNC 87)/IVCK (FNC270)/IVDR (FNC271)/IVRD (FNC272)/
IVWR (FNC273)/IVBWR (FNC274) instruction and an FLCRT (FNC300)/FLDEL (FNC301)/
FLWR (FNC302)/FLRD (FNC303)/FLCMD (FNC304)/FLSTRD (FNC305) instruction for the same port.
File ID
K-1(H0FFFF) : The FLDEL instruction deletes all files.
K0 to K63 : The FLDEL instruction deletes a file associated with the specified file ID.
K512(H200) : The FLDEL instruction formats the CompactFlash
When is "K-1 (H0FFFF)" or "K0" to "K63"
S
1
Specify the deletion method.
K0 : The FLDEL instruction deletes the specified file.
K1 : The FLDEL instruction deletes the association between the file name and the file ID
(but does not delete the file itself).
However, when the file ID specified in
itself without regard to the setting of
When is "K512 (H200)"
S
1
Specify the format type.
K256(H100) : The FLDEL instruction formats the CompactFlash
format.
Channel number used by the CF-ADP
K1 : ch1
K2 : ch2
34 FX3U-CF-ADP Applied Instructions – FNC300 to FNC305
34.2 FNC 301 – FLDEL / File delete²CF card format
Description
TM
card.
is "0", the FLDEL instruction deletes the file
S
1
S
2
TM
card in the FAT16
31
Data Type
32
16-bit binary
33
16-bit binary
34
16-bit binary
35
36
37
38
A
B
791