Assembly
Connecting the ventilation hoses
WARNING
Only use antistatic or non-conductive hoses, to avoid
risk to the patient.
Only use hose systems that are described here or if they
have an internal diameter of at least 10 mm, since the
measurement of the airway pressure may otherwise be
impaired!
Fit the ventilation hoses on the nozzles. Observing the
permissible hose lengths (in metres).
NOTE
Always hold the hoses by their sleeves when fitting and
removing them since they can otherwise be damaged.
When not using in combination with an incubator
Use the hinged arm with claw:
Swing both nozzles downwards or towards the patient.
Fit the ventilation hoses on the nozzles. Observing the
permissible hose lengths (in metres).
Install the water trap in a vertical position.
1.1m
0.5m
1m
Preparation
Assembly
0.4m
19