Operation
Nebulizing medicaments (optional)
Pneumatic medicament nebulizer 84 11 030
Prerequisite:
Compressed air connection on the rear of the unit and
conversion kit 84 11 025
Preparation
Install the coupling:
1
On the left side of the ventilator, remove the lower securing
screw of the case with a coin and secure the coupling under
this screw.
2
Push the plug into the socket on the rear of the ventilator
until it locks into position.
Prepare the medicament nebulizer according to the related
Instructions for Use. Open the inspiration hose and fit the
medicament nebulizer:
3
attach corrugated hose to the outlet and
4
attach corrugated hose to the inlet.
When using with an incubator
Insert the outlet of the nebulizer in the top hose port of the
incubator.
When using without an incubator
Press the rubber sleeve into the clip on the hinged arm.
Adjust the nebulizer to a vertical position and fill it.
54
1
2
4
3