Adjusting The Seat Depth; Adjusting The Seat Width; Adjusting The Backrest Height - Otto Bock Kimba neo Instructions For Use Manual

6.2.1 Adjusting the Seat Depth

1) Loosen the 2 knurled nuts on the underside of the seat (see Fig. 43, Pos. 1).
2) Adjust the seat depth by moving the footrest (see Fig. 44).
3) Hand-tighten the knurled nuts.

6.2.2 Adjusting the seat width

1) Loosen the 4 knurled nuts on the underside of the seat (see Fig. 45, Pos. 1).
2) Adjust the seat width by moving the hip supports (see Fig. 46). This also allows for abducted settings.
3) Hand-tighten the knurled nuts.

6.2.3 Adjusting the backrest height

1) Loosen the 2 set screws at the backrest tubes (see Fig. 47, Pos. 1).
2) Adjust the back insert to the desired height.
3) Tighten the set screws again.
INFORMATION: You can achieve a greater back height by additionally shifting the top back plate at
the back insert. To do so, loosen/remove the knurled nuts, shift the back plate and hand-tighten the
knurled nuts again.
Kimba neo
43
45
Adjustments
44
46
Ottobock | 23