Pelvic Band; Hook & Loop Foot Straps; Armrests; Tray - Otto Bock Kimba neo Instructions For Use Manual

Preparation for Use

5.2.3.6 Pelvic band

For installation information, consult the instructions that come with the product.
5.2.3.7 Hook & loop foot straps
Attach the hook-and-loop foot straps to the heel part of the footplate with two rivets or screws positioned beside
one another. The holes must be inserted in the footplate accordingly.
In addition, hook-and-loop foot straps can also be used for the forefoot area.

5.2.4 Armrests

For mounting information, see the Instructions for Use (User) - reference number 647G770.

5.2.5 Tray

For mounting information, see the Instructions for Use (User) - reference number 647G770.

5.2.6 Canopy adapter

INFORMATION
The canopy adapter is used for the subsequent installation of the canopy to a multifunctional seating unit. For
information on this, see the Instructions for Use (User) - reference number 647G770.
1) Loosen the set screws at the back tube (see Fig. 37, Pos. 1) and pull the back insert up.
2) Slide the canopy adapter with the proper side onto the backrest bar (see Fig. 38).
3) Pre-position the canopy adapter in a level manner (see Fig. 38).
4) Tighten the set screws of the canopy adapter again.
5) Put on the back insert and tighten again the set screws at the back tube.
20 | Ottobock
34
36
35
Kimba neo