When you place a call to the contact or receive a call from the contact, the touch screen will
display the contact photo.
Placing Calls to Contacts
To place a call to a contact from the local directory:
Tap
.
1.
The IP phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If Local Directory is removed from the directory (refer to
->Directory->All Contacts to enter the local directory.
Tap the desired contact.
2.
If the contact was added to a specified contact group, you can tap the contact group first,
and then tap the desired contact.
-
If only one number for the contact is stored in the local directory, the contact number
will be dialed out.
Customizing Your Phone
Directory
on page 66), tap
81