Sending Rtp Stream - Yealink SIP-T48G User Manual

(new paging mechanism).
The IP phones will automatically ignore all incoming multicast paging calls on the different
channel.

Sending RTP Stream

To configure a multicast paging key via phone user interface:
Tap ->Features->DSS Keys.
1.
Tap the desired line key.
2.
Tap the gray box of the Type field, and then select Key Event from the pull-down list.
3.
Tap the gray box of the Key Type field, and then select Multicast Paging from the
4.
pull-down list.
(Optional.) Enter the string that will appear on the touch screen in the Label field.
5.
Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Value field.
6.
The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Enter the desired channel in the Channel field.
7.
The valid channel ranges from 0 to 30.
Tap the Save soft key to accept the change or
8.
Multicast paging key is configurable via web user interface at the path Dsskey->Line Key.
Advanced Phone Features
to cancel.
209