Recall - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
When the called party becomes idle, the following prompt will appear on the touch screen of
the phone:
Tap OK to redial the number.
1.
Call completion is not available on all servers. For more information, contact your system
Note
administrator.

Recall

You can tap a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
Tap ->Features->DSS Keys.
1.
Tap the desired line key.
2.
Tap the gray box of the Type field, and then select Key Event from the pull-down list.
3.
Tap the gray box of the Key Type field, and then select ReCall from the pull-down list.
4.
(Optional.) Enter the string that will appear on the touch screen in the Label field.
5.
144