Conference; Local Conference - Yealink SIP-T48G User Manual

User Guide for the SIP-T48G IP Phone
If on code or off code is configured, the IP phone will send the corresponding code to
activate or deactivate call waiting on the server. It is not available on all servers.
Tap the Save soft key to accept the change or
5.
Call waiting is configurable via web user interface at the path Features->General Information.
Note
If on code or off code is not configured, the call waiting may not take effect. It depends on your
server. Contact your server administrator for more information.

Conference

You can use the SIP-T48G IP phone to create a conference with other two parties using the
phone's local conference or create a conference with multiple participants which is called
network conference.
Note
Network conference is not available on all servers. For more information, contact your system
administrator.

Local Conference

The SIP-T48G IP phone supports up to 3 parties (including yourself) in a conference call. This is
the default method of conference called Local Conference. You can create a conference
between an active call and a call on hold at any time by tapping the Conference soft key.
To set up a local conference call, make sure local conference feature is enabled. For more
Note
information, contact your system administrator.
To set up a local conference call:
Place a call to the first party.
1.
166
to cancel